Ricoh AP2600 Operating Instructions Manual page 57

B
Load envelopes until they stop,
with the print side up and the
sides of the flaps on the left as
shown below.
Important
Confirm that the envelope flaps
are securely folded down, and
that there is no air inside the en-
velopes.
Note
Confirm that the top of the stack
is not higher than the limit mark
on the side guides.
Do not push the stack of enve-
lopes with too much force.
C
Slide the side guides against the
edge of the envelope stack.
Note
Confirm that the edges of enve-
lopes fit under the side guides.
Loading Paper and Other Media
D
Set the envelope size and feed di-
rection using the operation panel
as follows:
A Press { { { { Menu} } } } .
Menu
On Line
Job Reset Escape
Form Feed Enter
Power Error
"Menu" appears on the panel
display.
B Press { { { { U U U U } } } } or { { { { T T T T } } } } to display
"Paper Input" menu.
Menu:
Paper Input
C Press { { { { Enter #} } } } .
Menu
On Line
Job Reset Escape
Form Feed Enter
Power Error
The following message appears.
Paper Input:
Bypass Size
D Press { { { { Enter #} } } } .
3
Data In
Data In
45