Appendix
D
Remove paper from the paper tray.
Place the tray upside down on a
flat surface.
E
Use a sharp-pointed item like a
ball-point pen, to release the two
catches that lock the friction pad.
7
F
Return the paper tray to its origi-
nal position, and remove the fric-
tion pad from the tray.
134
G
Insert the new friction pad in the
paper tray.
Attach the center projection of the
new friction pad to the spring and
align the projection of both sides of
the friction pad to the holes of the
paper tray. Then push the friction
pad as shown in the illustration
until it clicks.
H
Push the friction pad until it locks
securely.
I
If your printer is equipped with
the optional Paper Feed Unit(s),
follow the same procedure when
replacing the friction pad.