Ricoh AP2600 Operating Instructions Manual page 105

E
Slide the green lock lever to the
left (A A A A ), so that the paper feed
roller can be released (B B B B ).
F
Wipe the rubber part of the roller
with a soft damp cloth. After that,
wipe it with a dry cloth to remove
the water.
Important
Do not use chemical cleaner or
organic solvent such as thinner
or benzene.
G
While sliding the green lock lever
to the left (A A A A ), set the paper feed
roller to its original position (B B B B ).
After that, return the green lock
lever to its original position (C C C C ).
Note
Confirm that the green lock le-
ver secures the roller correctly
by confirming that the roller ro-
tates smoothly.
Cleaning and Adjusting the Printer
H
Move the printer to the place
where it was placed. Carefully
slide the paper tray into the print-
er until it stops.
Important
Do not slide the paper tray in
with force. If you do, the front
and side guides might move.
I
Insert the plug of the power cord
into the wall socket securely.
Connect all the cables that were
removed in step B B B B .
J
Turn on the power switch.
Note
Follow the same procedure to
clean the paper feed roller of the
optional Paper Feed Unit.
5
93