Changing The Maintenance Menu - Ricoh AP2600 Operating Instructions Manual

Making Printer Settings with the Operation Panel
Menu
HDD Format
Menu Protect

Changing the Maintenance Menu

6
Protecting the menus
A
Check if the On Line indicator is on. If not, press { { { { Online} } } } to enter the
"Ready" condition.
B
Press { { { { Enter #} } } } , then { { { { Escape} } } } , and then { { { { Menu} } } } .
On Line
Job Reset
Form Feed
Power
"Menu" appears on the panel display.
C
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display the "Maintenance" menu, and then press { { { { Enter #} } } } .
The following message appears on the panel display.
Maintenance:
Image Density
112
After installing the Hard Disk Drive, format it.
Reference
For more information about formatting the Hard Disk Drive,
see "Installing the Hard Disk Drive Type 2600" in the Setup Guide.
This procedure lets you protect menu settings against accidental
changes. It makes it impossible to change the menu settings you
make with the normal procedure unless you perform the required
key operation. In a network environment, protecting settings re-
stricts changes to menu settings to network administrators.
• Level 1
• Level 2
• Off
Note
While the printer is Online, press {Enter #}, and then press {Es-
cape}, finally press {Menu}. You can access the "Menu Protect"
menu on the panel display.
Menu
Escape
Enter
Error Data In
Description