Ricoh AP2600 Operating Instructions Manual page 133

Menu
Network Setup
Description
Gateway Address
You can set the Gateway Address.
Note
Default: All zero
Reference
See "Configuring the Printer for the Network with the Opera-
tion Panel" in the Setup Guide.
Access Control
You can set the Access Control Address.
Note
Default: All zero
Access Mask
You can set the Access Control Mask.
Note
Default: All zero
Network Boot
You can set how the Network Interface Board acquires TCP/
IP settings.
Note
Default: None
Reference
See "Configuring the Printer for the Network with the Opera-
tion Panel" in the Setup Guide.
Frame Type (NW)
You can set the Frame Type for NetWare.
Note
Default: Auto
Active Protocol
You can set the active protocol.
TCP/IP, NetWare, NetBEUI, AppleTalk
Note
Default: All Active
Host Interface Menu
121
6