Ricoh AP2600 Operating Instructions Manual page 98

Troubleshooting
F Close the cover of the Duplex Unit.
If the error message appears
again, go to step B.
B
Pull the Duplex Unit out of the
printer until it stops, and remove
the misfed paper.
5
A Push down the lever on the right
side of the Duplex Unit (A A A A ) and
pull it out until it stops (B B B B ).
B Lift the guide board inside the
Duplex Unit, and remove the
misfed paper.
86
Important
When A5L paper misfeeds,
you might not remove it by
pulling the Duplex Unit out.
In this case, pull the paper tray
out and remove the paper.
C While aligning the power cord
with the groove of the left slide
of the Duplex Unit, insert the
Duplex Unit into back of the
printer aligning the rails inside
of the printer until it is con-
nected.
If the error message appears
again, the misfed paper might be
left in the printer. Confirm that
the inside of the printer. For more
information, see P.82 "When "Re-
move Misfeed Internal Path/Open
Front Cover" Appears".