Troubleshooting; Error & Status Messages On The Operation Panel - Ricoh AP2600 Operating Instructions Manual

Error & Status Messages on the Operation
Panel
Messages/Second messages
Call Service: EC
Power Off On
/If Error Reoccur
Call Service
Change Setting
Tray #
/Paper Size:
Paper Type:
Close Duplex
Unit Cover
Close
Front Cover
Close Rear/Paper
Exit Cover
Close
Mailbox Cover
Collate Cancelled
Driver Setting Error (Memo-
ry)

5. Troubleshooting

Description
An error has occurred in the
printer.
The paper type and size set-
ting on the tray differs from
that of actual paper type and
size in the tray.
The cover of the optional Du-
plex Unit is open.
The front cover is open.
The paper exit cover or the
rear cover is open.
The cover of the Mailbox is
open.
The collate feature has been
canceled.
The actual amount of memory
installed does not match the
setting of printer driver. The
current print job has been can-
celed.
Solution
First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.
Load { paper size and type }
paper with the selected feed
direction into tray. Printing
will not automatically resume
if the paper type, size and di-
rection setting is incorrect.
There are two methods to
resume printing.
A
Use the operation panel to
set the correct paper type,
size and direction of the
paper in tray.
B Press {Form Feed} and se-
lect the tray with the oper-
ation panel.
Close the cover of the optional
Duplex Unit.
Close the front cover.
Close the paper exit cover or
the rear cover.
Close the cover of the Mail-
box.
To print the image correctly,
add memory to the printer, or
reduce the resolution of the
image.
Configure the memory size
correctly from the printer
driver.
59