Removing Misfed Paper; When "Remove Misfeed Paper Tray" Appears - Ricoh AP2600 Operating Instructions Manual

Removing Misfed Paper

When a paper misfeed occurs, an error message appears on the panel display.
The procedure you should follow to remove misfed paper depends on the loca-
tion of the misfeed, which is indicated on the panel display.
R CAUTION:
• When removing misfed paper, do not touch the fusing section because it
becomes very hot.
Important
Check the following points if paper continues to misfeed.
• Confirm that the setting of the paper size dial matches the size and feed di-
rection of the paper loaded in the paper tray.
• If the friction pad or the paper feed roller is dirty, clean it. For more infor-
mation, see P.91 "Cleaning the Friction Pad".
• Confirm that the toner cartridge is set correctly.
If a paper misfeed still occurs, contact your sales or service representative.
Removing misfed paper with force, cause the paper might be torn and left some torn
scraps within the printer. This makes the printer misfed and might be damaged.
Do not leave any torn scraps within the printer.
When "Remove Misfeed Paper
Tray" Appears
Important
Removing misfed paper with force,
cause the paper might be torn and
left some torn scraps within the
printer. This makes the printer mis-
fed and might be damaged.
A
Lift the paper tray slightly then
pull it out until it stops, and re-
move misfed paper.
B
Carefully slide the paper tray into
the printer until it stops.
Important
Do not slide the paper tray in
with force. If you do, the front
and side guides might move.
Removing Misfed Paper
5
81