Ricoh AP2600 Operating Instructions Manual page 62

Sample Print/Locked Print
I
Check the print job to confirm
whether the settings are acceptable.
If the settings are fine, go to step J
to print the rest of the print job.
If not, you can delete the saved job.
⇒ P.51 "Deleting a Sample Print File"
J
On the printer's operation panel,
press { { { { Menu} } } } .
On Line
Job Reset
4
Form Feed
Power
"Menu" appears on the panel dis-
play.
K
Press { { { { T T T T } } } } or { { { { U U U U } } } } to display the
"Sample Print" menu.
Menu:
Sample Print
L
Press { { { { Enter #} } } } .
On Line
Job Reset
Form Feed
Power
The following message appears on
the panel display.
Sample Print:
08:56 ABCD1234
50
Menu
Escape
Enter
Error Data In
Menu
Escape
Enter
Error Data In
M
Press { { { { T T T T } } } } or { { { { U U U U } } } } to display the
file you want to print, and then
press { { { { Enter #} } } } .
Select Action:
Print File
Note
If you want to cancel the sample
print file, press {Escape}.
N
Press { { { { Enter #} } } } .
The following message appears on
the panel display.
Qty: 1(1-999)
Press # To Print
O
Press { { { { U U U U } } } } or { { { { T T T T } } } } to enter the
number of sets.
Note
You can enter up to 999 sets.
Qty: 6(1-999)
Press # To Print
P
Press { { { { Enter #} } } } to print the file.
The following message appears on
the panel display.
Printing...
Note
If you are not satisfied with the
first printout of the sample print
file and do not want to print the re-
mainder, the job in the printer is
deleted automatically.