Table of Contents
Advertisement
B. CF Module Installation
1.
Follow Steps 1 ~ 3 of Subsection A.
2.
Retrieve the CF module card from the module case and remove the two screws
at the sides of the metal tray (1). Affix the CF module card to the top of the metal
tray. Then insert the tray in the direction shown in Fig. 2.46 and connect the
SATA-to-SATA power cable (2).
The assembled CF module should appear as shown in Fig. 2.47.
Note!
The CF module should be above the metal tray when installed.
3.
Follow Step 5 of Subsection A to affix the mini-SATA drive to the SATA board.
PPC-3150/3170/3190 User Manual
1
2
Figure 2.46
Figure 2.47
38
Advertisement
Table of Contents
