3.
Remove the screw on the side of the I/O cover (see Fig. 2.38).
Note!
Retain the I/O cover for future use when a module is not installed.
4.
Retrieve the CFast module card from the module case and remove the two
screws located at the side (1) of the metal tray. Affix the CFast card to the
underside of the metal tray. Then insert the tray in the direction shown in
Fig.2.39 (2) and connect the red SATA cable (3).
The assembled CFast module should appear as shown in Fig. 2.40.
Note!
The CFast module should be below the metal tray when installed.
1
3
Figure 2.38
2
Figure 2.39
33
PPC-3150/3170/3190 User Manual