LAI Games VIRTUAL RABBIDS THE BIG RIDE Operator's Manual page 35

64. Align the front sled with the motion base, and install the link brackets using the screws
previously removed from the motion base
65. Install the chain link, using the same screws removed from the motion base. Note that bolts
should be centred in the slots for the link brackets before tightening the chain link
66. Complete the same procedure on the opposite side
67. Plug in all the connectors to the sled assembly
68. Align the side ski to one side of the platform
69. Connect the plug to the motion base outlet, as shown below
70. Secure the ski using the same 3x M6 hex bolts and washers removed from the motion base
(one front, two back)
71. Complete the above three steps on the opposite side
35