LAI Games VIRTUAL RABBIDS THE BIG RIDE Operator's Manual page 28

CONTINUE ASSEMBLY
Standard, compact and mini version unit assembly instructions continue below.
25. Open the rear or front access doors in preparation for installing the dust clouds
26. Feed the connector plug through the access holes on the right hand side of the tower
27. Align the right hand dust cloud with the 4x slotted holes at the side of the tower, pushing
down to slide it into place
28. Secure it using 1 x M6 screw and washer as shown and plug in the connector
29. Repeat the previous four steps on the opposite side
28