LAI Games VIRTUAL RABBIDS THE BIG RIDE Operator's Manual page 33

50. Take the footrest and slide it down into place on the motion base, aligning the mounting
holes as shown below
51. Secure it using 6x M6 screws and washers. Ensure Loctite 242 is applied to these screws.
52. Repeat the previous two steps on the opposite side
53. Install the rear cable trunking panel using 2x M6 hex bolts and washers
54. Pull out the external cables from the motion base
55. Install the cover using 4x M6 screws and washers
33