LAI Games VIRTUAL RABBIDS THE BIG RIDE Operator's Manual page 21

COMPACT VERSION
To continue assembling a standard version unit, please skip this section and continue on to step 25.
To assemble a compact version unit, please start at the steps directly below.
1. Position and align the top cross frame at the top of the tower
2. Secure it using 6x M6 screws on the external side, and 6x M5 nuts from within the tower
3. Align and install the side hanger assembly by inserting the connector through the cable
access holes into the side of the top cross frame
4. Position and align studs into the holes and install using 4x M5 flange nut internally
5. Connect the grounding point
6. Complete the above steps on the opposite side of the tower
21