Step 7: Set The Language And The Units - Roland VersaUV LEC2-300 Setup Manual

2. Assembly and Ink Filling

Step 7: Set the Language and the Units

Procedure
A
Close the front cover.
B
Turn on the main power switch.
C
Hold down [MENU] and press the sub power switch.
D
Press [ ] or [ ] to select the language you want, and then press [ENTER].
MENU LANGUAGE
ENGLISH
E
Press [ ] or [ ] to select the unit of measurement you want (for length), and then press
[ENTER].
LENGTH UNIT
mm
F
Press [ ] or [ ] to select the unit of measurement you want (for temperature), and then
press [ENTER].
TEMP. UNIT
。
C
36
2.Installation
INCH
。
F