Roland VersaUV LEC2-300 Setup Manual page 40

2. Assembly and Ink Filling
1.
Select the ink type.
A
Press [ ] or [ ] to select the ink type, and then press [ENTER].
SELECT INK TYPE
ECO-UV4 4COLOR
Name to select
ECO-UV4 4COLOR
ECO-UV4 6COLOR
B
Press [ ] or [ ] to select [YES], and then press [ENTER].
ECO-UV4 4COLOR
[YES]
If the ink type is incorrect, select [NO], and then press [ENTER] to start again from step
C
Make sure the drain bottle is installed.
INSTALL
DRAIN BOTTLE
D
Press [ENTER] to confirm your entry.
2.
Clean the print heads using the SOL INK cleaning cartridges.
A
When the following screen is displayed, remove the cartridges whose slot numbers are
flashing.
REMOVE CL-LIQUID
12
B
When the following screen is displayed, insert SOL INK cleaning cartridges into the slots
whose numbers are flashing.
The SOL INK cleaning cartridges are not differentiated by color.
SET CL-LIQUID
12
The screen shown below appears.
FILLING INK...
>
38
2.Installation
SELECT INK TYPE
ECO-UV4 6COLOR
Cyan (C)
Magenta (M)
Yellow (Y)
Black (K)
○
○
ECO-UV4 6COLOR
NO [YES]
White (W) Gloss (Gl)
○ ○
NO
A
.