Roland VersaUV LEC2-300 Setup Manual page 33

B
Install the drain funnel.
Screw the drain funnel all the way into the hole where the bottom plug was attached.
IMPORTANT
Use caution to turn the bottle without applying excessive force.
C
Install the drain bottle stand.
Insert the drain bottle stand into the groove on the bottom surface of the printer unit, and then shift the
drain bottle stand to the left.
D
Attach the cable to the printer unit, and then secure the drain bottle stand in place.
Tighten the bolts securely (2 locations in total).
2. Assembly and Ink Filling
Tighten fully
Bolts: 2
31
2.Installation