Roland VersaUV LEC2-300 Setup Manual page 41

C
When the following screen is displayed, remove the SOL INK cleaning cartridges whose
slot numbers are flashing.
REMOVE CL-LIQUID
12
D
When the following screen is displayed, insert SOL INK cleaning cartridges into the slots
whose numbers are flashing.
The SOL INK cleaning cartridges are not differentiated by color.
SET CL-LIQUID
34
The screen shown below appears.
FILLING INK...
>
E
When the following screen is displayed, remove the SOL INK cleaning cartridges whose
slot numbers are flashing.
REMOVE CL-LIQUID
34
F
B
Repeat steps
SET CARTRIDGE
12345678
3.
Insert the ink cartridge for each color.
A
Before inserting ink cartridges, shake each of them 50 times (about 20 seconds).
The precipitation of the ingredients in the ink disables printing in normal color. So that the ink mixes well,
shake the ink cartridge horizontally with a stroke length of around 5 cm (2 in.) from each end of the ink
cartridge.
E
to until the screen shown below appears.
2. Assembly and Ink Filling
2.Installation
39