Checks Before Installation; About Placement And Installation Work; Deciding On An Installation Site - Roland VersaUV LEC2-300 Setup Manual

1. Checks before Installation

About Placement and Installation Work

The placement and installation of this machine must be performed by suitably qualified workers.
WARNING

Deciding On an Installation Site

Install the machine in a quiet, stable location offering good operating conditions. An unsuitable location can cause
accidents, fire, faulty operation, or breakdown.
WARNING
WARNING
WARNING
WARNING
WARNING
CAUTION
Unsuitable installation sites
• Locations subject to large fluctuations in temperature or humidity
• Locations subject to shaking or vibration
• Locations where the floor is tilted, not level, or unstable
• Dusty locations
• Locations exposed to direct sunlight
• Locations near air-conditioning or heating equipment
• Locations exposed to water or moving air
• Locations exposed to considerable electrical or magnetic noise or other forms of electromagnetic energy
22
2.Installation
Entrust operations such as transportation, unloading, and emplacement to trained
professionals.
Suitable equipment and technical skills are required in handling the machine. Tasks
that require undue effort may result in a major accident.
Install the machine in a location that is level, stable, and able to bear the weight of
the machine.
The total weight of the machine may reach over 150 kg (330.7 lb.). Installation in an
unsuitable location may cause a major accident, including tip over, fall, or collapse.
Never install the machine outside or in any location where exposure to water or
high humidity may occur.
Current leakage may cause electrical shock or fire.
Never install the machine close to any flammable object or in a gas-filled location.
Combustion or explosion could occur.
Install the machine in a clean, brightly lit location.
Working in a location that is dark or cluttered may lead to an accident, such as
becoming caught in the machine as the result of an inadvertent stumble.
Position the machine so that the power plug is within immediate reach at all times.
This is to enable quick disconnection of the power plug in the event of an
emergency. Install the machine next to an electrical outlet. Also, provide enough
empty space to allow immediate access to the electrical outlet.
Ensure adequate ventilation for the work area.
Failing to perform ventilation may result in a health hazard or danger of combustion
due to ink fumes.