Table of Contents
Advertisement
August 7th, 1995
1.3. COMPONENT LAYOUT
1.3.1. Mechanical Components
6
7
5
3
4
2
No.
Name
ADF Roller
1
R1 Roller
2
CIS Spring
3
Contact Image Sensor
(CIS) Assembly
4
Scanner Roller
5
Document Feed Roller
6
Separation Pad Spring
7
8
Separation Pad
9
Decurler
10
Thermal Head
11
Platen Roller
12
Thermal Head Spring
Cutter Assembly
13
8
1
Picks up pages of the document.
Feeds the document through the scanner.
This applies pressure against the scanner roller.
This sensor reads and converts the light reflected from
the document into an analog video signal. An LED
array, which illuminates the document, is contained in
this unit.
Feeds the document through the scanner.
Feeds the document through the scanner.
This applies pressure to prevent the ADF roller from
feeding more than one sheet at a time.
Allows one page into the scanner.
This applies stress to the paper to remove the curl.
This prints by applying heat to the thermal paper.
This feeds printouts out of the machine.
This applies pressure against the platen roller.
This consists of the cutter sensor, paper guide frame,
rotary cutter blade, cutter motor, and printer jam sensor.
1-5
OVERALL MACHINE INFORMATION
COMPONENT LAYOUT
11
10
9
Description
12
13
H068D001.wmf
Advertisement
Table of Contents
