Ricoh FAX180 Service Manual page 16

OVERALL MACHINE INFORMATION
POWER DISTRIBUTION
1.6.2. Memory Back-up
[A]
[B]
The +5VBAT supply from the lithium battery [A] backs up the system RAM
which contains system parameters and programmed telephone numbers,
and the real time clock in the main CPU.
BRO China model:
Two dry cells [B] and the dc/dc converter on the FCU back up the DRAM, if
there is data in the SAF memory and the power is switched off.
The dry cells generate about 3 volts (max. 3.2 volts). The dc/dc converter
(IC30) lifts this voltage to 5 volts so it can be used as the +5VD supply for
SAF backup. The CPU monitors the voltage of the +5VD supply with the
VDVDET signal. When the dry cells have run down, and the voltage is lower
than 4.4 volts, the CPU stops the dc/dc converter by dropping 1SAFFG to low
and the machine stops backing up the memory.
There is no battery switch for the battery [B].
+5V
POWERS
Switching
FCIP
Circuit
5RTCCS
DRAM
System
RAM
+5V +5V
+5VBAT
DC/DC
Converter
[IC30]
Q3
+5V
1-14
August 7th, 1995
FCU
VDVDET
1SAFFG
+5V
H068V502.wmf