Table of Contents
Advertisement
DETAILED SECTION DESCRIPTIONS
August 7th, 1995
PRINTING
3. Paper Size and Paper End Detection
[C]
[B]
[A]
H068D011.wmf
H068D008
[D]
In B4 models, the paper size detector [A] on the FCU is located under the pa-
per holder. When a roll of A4/8
" width paper is placed in the paper holder
1/2
and the paper guide [B] is installed in the paper holder, the paper guide acti-
vates the paper size detector. Thus, the machine determines which paper
size has been installed.
When the paper runs out, the actuator of the cover open/paper end sensor
[D] pivots into the sensor, and "REPLACE PAPER" is displayed.
When paper runs out while a received message is being printed, the machine
will operate as follows.
Machines without memory: The communication is terminated. Then the ma-
chine sends an error protocol signal to the sender.
Machines with memory: The received message is stored into the memory
(subsutitute reception). After recovering from the error, the message will be
printed.
2-8
Advertisement
Table of Contents
