Ricoh FAX180 Service Manual page 47

SERVICE TABLES AND PROCEDURES
BIT SWITCHES
System Switch 04
No FUNCTION
0-2 Not used
Dedicated transmission
3 parameter programming
0: Disabled 1: Enabled
4-5 Not used
CSI programming level
6 0: User level
1: Service level
Telephone line type
programming mode
7
0: User level
1: Service level
System Switch 05
No FUNCTION
0 Not used
1
Display of both RTI and CSI
on the LCD
2
0: Disabled 1: Enabled
3-7 Not used
COMMENTS
Do not change the settings.
This bit must be set to 1 before changing any
dedicated transmission parameters.
Do not change the settings.
1: The CSI can only be programmed using a service
function.
1: Telephone line type selection can only be
programmed using a service function.
COMMENTS
Do not change the settings.
1: Both RTI and CSI will be displayed alternately on
the LCD.
Do not change the settings.
4-16
August 7th, 1995