T8S Calibration; Chapter 2 Firmware Upgrade - RadioLink T8S Instruction Manual

Radiolink Electronic Ltd
www.radiolink.com

1.2.4 T8S Calibration

When the transmitter is power-off, toggle both sticks at the central point. Then press the first trimmer
button on the left (with an arrow to left) and the power button simultaneously, the four green
indicators will start flashing and the T8S is ready to be calibrated.。
Range Calibration: Toggle both sticks (Ch1-4) to the highest point/maximum and the lowest
point/minimum. Then back to the central point. (Refer to image below)
Central Point Calibration: When the sticks are back to the central point, press the second trimmer
button on the left (with an arrow to right). Two short DD sounds will be heard while the first green
indicator is always on, meaning the stick calibration is complete.

Chapter 2 Firmware Upgrade

T8S can be upgraded with latest functions added, keeping advanced as always.
The function of data backup makes massive copy possible, Even the same model can directly copy data.
Set parameters once, copy at ease!
The whole file with all necessary tools can be download via
https://mega.nz/#F!sVESQSwR!65d0382IOAXwMz2uHcPZCg
5