Removing The Lens - Christie D Series Installation And Setup Manual

Removing the lens

Use the correct method of removing the lens.
1. Move the lens to the center position:
a) Press LENS SHIFT.
b) To access the CENTERING feature, from the LENS SHIFT dialog, press INPUT.
c) To center the lens, press the Right arrow.
To center the lens in standby mode, on the control panel, press FUNCTION and LENS SHIFT
at the same time for three seconds.
2. Turn off and unplug the projector.
3. Allow the projector to sufficiently cool down.
4. To remove the front cover, move and slide the cover up while pressing the front cover from the
underside and remove the front cover from the projector.
Front cover
(upper part)
5. To remove the lens:
a) Support the lens.
b) Lower the lens lock lever to the lowest position.
c) Remove the lens from the projector.
To avoid any malfunctions, ensure the surface of the lens does not come in contact with
the projector.
Optional Lenses D Series and LW551i Installation and Setup Manual
020-102490-02 Rev. 1 (04-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Front cover
(upper part)
Installing lenses for the LW551i projector
11