Table of Contents
Advertisement
6. Using the two M4x10 screws, attach the mount bracket to the ultra short throw fixed lens and
torque to 0.98 Nm (10 kgf·cm).
Note the direction of the arrow on the lens mount bracket.
7. Remove the two adjusters from the projector.
8. Insert the two collars into the removable adjusters and mount the projector.
Collars
9. Using the hex key, loosen the screw until it stops.
Screw
10. Attach the support bracket to the lens mount bracket.
Optional Lenses D Series and LW551i Installation and Setup Manual
020-102490-02 Rev. 1 (04-2017)
Copyright
2017 Christie Digital Systems USA Inc. All rights reserved.
©
Installing the ultra short throw fixed lens
M4x10 screws
Lens mount bracket
Ultra short throw fixed lens
Adjusters
Adjusters
20
Advertisement
Table of Contents
