Table of Contents
Advertisement
3. Install the lens:
a) Remove the lens cap from the lens.
b) Turn the lens so the product label is facing up.
c) Slide the lens into the projector.
To avoid any malfunctions, ensure the surface of the lens does not come in contact with
the projector.
Lens cap (rear)
d) Support the lens and move the lens lock lever upward until the lever clicks into the locked
position.
Lens lock lever
e) To prevent the lens from falling off, after attaching the lens, check that it is securely
mounted and that the lens does not move.
4. Re-install the upper and lower front covers.
Optional Lenses D Series and LW551i Installation and Setup Manual
020-102490-02 Rev. 1 (04-2017)
Copyright
2017 Christie Digital Systems USA Inc. All rights reserved.
©
Product
label
スケール 0,500
Front cover (upper part)
Front cover (lower part)
Installing lenses for D Series projectors
7
Advertisement
Table of Contents
