Adjusting The Focus; Removing The Lens - Christie D Series Installation And Setup Manual

Adjusting the focus

Adjust the focus at the center and peripheral parts of the screen.
Automatic recognition may not work depending on the projector. Although the Zoom dialog may be
displayed when adjusting the focus at the peripheral part, it is not a failure.
The lens memory function is not supported by this lens.
1. To adjust the focus on the center of the screen:
a) To display the FOCUS dialog, press FOCUS +/-.
b) To adjust the focus at the center of the screen, press FOCUS +/-.
2. To adjust the focus at the peripheral part of the screen:
a) To display the FOCUS dialog, press ZOOM +/-.
b) To adjust the focus at the peripheral part of the screen, press ZOOM +/-.

Removing the lens

Use the correct method of removing the lens.
1. Move the lens to the center position:
a) Press LENS SHIFT.
b) To access the CENTERING feature, from the LENS SHIFT dialog, press INPUT.
c) To center the lens, press the Right arrow.
Optional Lenses D Series and LW551i Installation and Setup Manual
020-102490-02 Rev. 1 (04-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Front cover (lower part)
Front cover (upper part)
Installing the ultra short throw fixed lens
16