Installing Lenses For The Lw551I Projector; Installing The Lens - Christie D Series Installation And Setup Manual

Installing lenses for the
LW551i projector
Learn how to install and remove lenses for the LW551i projectors.

Installing the lens

Only use lenses designed for the projector model.
1. Remove the lens cap from the lens.
2. Turn the lens so the product label is facing up.
3. Slide the lens into the projector.
To avoid any malfunctions, ensure the surface of the lens does not come in contact with the
projector.
Lens cap (rear)
Product label
4. Support the lens and move the lens lock lever upward until the lever clicks into the locked
position.
Lens lock lever
5. To prevent the lens from falling off, after attaching the lens, check that it is securely mounted
and that the lens does not move.
6. Re-install the front cover.
Optional Lenses D Series and LW551i Installation and Setup Manual
020-102490-02 Rev. 1 (04-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
10