Removing The Zoom Lens - Christie Q Series Installation And Setup Manual

Removing the zoom lens

Use the correct method of removing the lens.
1. Move the lens to the center position:
a) Press LENS SHIFT.
b) To access the CENTERING feature, from the LENS SHIFT dialog, press INPUT.
c) To center the lens, press the Right arrow.
To center the lens in standby mode, on the control panel, press FUNCTION and LENS SHIFT
at the same time for three seconds.
2. Turn off and unplug the projector.
3. Allow the projector to sufficiently cool down.
4. Remove the front cover:
a) Slide the upper part of the front cover upward while pressing the front cover from the
underside and remove from the projector.
b) Slide the lower part of the front cover downward while pressing the front cover from the
upperside and remove from the projector.
Optional Lenses Q Series Installation and Setup Manual
020-102550-01 Rev. 1 (04-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Installing the zoom lenses for Q Series
Front cover
(lowwer part)
Front cover
(upper part)
8