Overview - ADJ ELEMENT ST HEX User Instructions

Element ST Hex
3
4
1. Service Port: This port is used for software updates.
2. Tilt Adjustment Leg: This tilt adjustment leg is used to angle the unit to various degrees. There
are 7 different angled levels. See page 21 for more information.
NOTE: Sliding the adjustment leg out to far will cause the leg to "dislodge" from the unit.
3. Voltage Adapter Input: This input is used to connect the included voltage adapter. After connecting
the adapter, plug the other end into a matching power source.
NOTE: Please only use the provided power adapter that is included with the unit.
4. Power On/Off Switch: This switch is used to power ON/OFF the unit.
ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 9

Overview

1
2