ADJ ELEMENT ST HEX User Instructions page 18

Element ST Hex
DMX SETTINGS - The submenus listed under DMX SETTINGS are as follows: DMX Address, DMX
Channel Mode, and No DMX Status.
- DMX ADDRESS MODE - In this submenu you are able to find and set your desired DMX address.
- DMX CHANNEL MODE - In this submenu you are able to find and set your desired DMX channel
mode.
- NO DMX STATUS - This setting is used as a precaution mode in case the DMX signal is lost or
interrupted. The operating mode chosen is the running mode the fixture will go into when the DMX
signal is lost. Listed below are the 4 modes.
• HOLD LAST - This setting will have the fixture stay in the last DMX setup.
• BLACKOUT - This setting will have the fixture automatically go into blackout mode.
• MANUAL SETTINGS - This setting will have the fixture automatically revert to your manual settings.
• INTERNAL PROGRAM - This setting will have the fixture automatically run 1 of 15 (0-15) internal
programs.
PERSONALITY - The submenus listed under PERSONALITY are as follows: Master, Slave, Dim
Modes, WiFly Settings, Display, Language, and Service.
- MASTER - Set the unit to act as the Master unit in a master-slave set up.
- SLAVE - Set the unit to act as a slave unit in a master-slave set up.
- DIM MODES - In this submenu you are able to set your desired dimmer mode or adjust and set
your desired dimming speed.
- DISPLAY - In this submenu you are able to set your display blackout time, touch screen lock time,
and invert the display.
- LANGUAGE - In this submenu you are able to select your desired display language.
- SERVICE - In this submenu you are able to reset the unit to its factory/default settings.
MANUAL CONTROL - This submenu is for manual control and testing.
INTERNAL PROGRAMS - This menu allows you to select 1 of 15 (0-15) internal programs to run. The
internal program speed and fade speeds are adjustable. The internal programs can also be run as
sound active.
INFORMATION - The submenus listed under INFORMATION are as follows: LED Temperature and
Software Version.
- LED TEMPERATURE - This submenu allows you to check the current LED temperature.
- SOFTWARE VERSION - This submenu allows you to check the current software version.
ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 17
System Menu