Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ADJ Eliminator Decor MBSK
Summary of Contents for ADJ Eliminator Decor MBSK
- Page 1 Decor MBSK User Guide...
- Page 2 ©2019 Eliminator Lighting all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. Eliminator logo and identifying product names and numbers herein are trademarks of Eliminator Lighting. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted.
-
Page 3: Table Of Contents
C O N T E N T S General Information Limited Warranty (USA Only) Safety Guidelines Maintenance Guidelines Overview Installation Guidelines Trouble Shooting | FAQ’s | Optional Accessories Technical Specifications and Dimensions... -
Page 4: General Information
G E N E R A L I N F O R M A T I O N INTRODUCTION Please read and understand all instructions in this manual carefully and thoroughly before attempting to operate this product. These instructions contain important safety and use information. UNPACKING: This product has been thoroughly tested and has been shipped in perfect condition. -
Page 5: Limited Warranty (Usa Only)
C. This warranty is void if the serial number has been altered or removed; if the product is modified in any manner which ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior written authorization was issued to purchaser by ADJ Products, LLC;... -
Page 6: Safety Guidelines
S A F E T Y G U I D E L I N E S To guarantee a smooth operation, it is important to follow all instructions and guidelines in this manual. ELIMINATOR LIGHTING is not responsible for injury and/or damages resulting from the misuse of these devices due to the disregard of the information printed in this manual. -
Page 7: Maintenance Guidelines
M A I N T E N A N C E G U I D E L I N E S SCRIM CLEANING The fire retardant coating on the fabric of the scrim is a topical chemical treatment. The flame resistance of the treated fabric has an approximate life span of up to one year. - Page 8 O V E R V I E W INCLUDED ITEMS Tripod Stand (1) Bracket Arm with Telescoping Rod (1) Integrated Motor (1) Scrim Clamp (1) Fire-Retardant Scrim (1) Stand Adaptor (1) Pin & Dowel Set (1)
-
Page 9: Overview
O V E R V I E W 1. Integrated Motor 6. Tripod Stand 2. Mirror Ball Attachment Eyelet 7. Telescoping Rod 3. Bracket Arm 8. Fire-Retardant Scrim 4. Stand Adaptor 9. Scrim Clamp 5. Adaptor Tightening Knob... - Page 10 I N S T A L L A T I O N G U I D E L I N E S FLAMMABLE MATERIAL WARNING Keep devices minimum 5.0 feet (1.5m) away from flammable materials and/or pyrotechnics. ELECTRICAL CONNECTIONS A qualified electrician should be used for all electrical connections and/or installations. DO NOT INSTALL THE DEVICES IF YOU ARE NOT QUALIFIED TO DO SO! FOR ADDED PROTECTION, PLACE IN AREAS OUTSIDE WALKING PATHS, SEATING AREAS, OR AREAS WHERE UNAUTHORIZED PERSONNEL CAN REACH THE STAND OR ANY EQUIPMENT MOUNTED ON IT.
- Page 11 I N S T A L L A T I O N G U I D E L I N E S Ç 1. Loosen the lower clamp on the tripod, located just above the hinge of the tripod legs. Deploy the tripod stand by pulling the legs apart from each other, or by pushing downward on the hinge of the tripod legs.
- Page 12 I N S T A L L A T I O N G U I D E L I N E S 3. Slip the scrim clamp onto the telescoping rod, making sure the clamp is oriented with the hook facing upward. Tighten the clamp to secure it in the desired position. Leave enough space above the scrim clamp to install the stand adaptor at the top of the telescoping rod, and do not cover the holes on the telescoping rod.
- Page 13 I N S T A L L A T I O N G U I D E L I N E S 5. Hold the bracket arm vertically with the motor side up. Find the mounting hole on the lower end of the bracket arm, and align it with the hole on the stand adaptor. With the washer still inserted onto the adjustment knob, thread the adjustment knob through the mounting hole in the bracket arm and tighten.
- Page 14 I N S T A L L A T I O N G U I D E L I N E S 7. Find the slit in one corner of the fire-retardant scrim. Insert the hook of the scrim clamp through this slit, then tuck each of the remaining corners under the legs of the tripod stand.
- Page 15 I N S T A L L A T I O N G U I D E L I N E S 9. Insert the dowel into the lowest available hole in the telescoping rod, then lock the dowel in place by inserting the pin into the pinhole at the end of the dowel. Please note that in the picture above, the scrim has been removed for the sake of clarity.
- Page 16 T R O U B L E S H O O T I N G T I P S The mirror ball motor does not turn ON. 1. Confirm the AC power cord is not damaged or cut. 2. Check if circuit breaker that controls the AC outlet that the device is plugged into is not tripped. 3.
- Page 17 T E C H N I C A L S P E C I F I C A T I O N S Model: Decor MBSK Working Position: Upright only Power Consumption: 3.5 W Voltage: 120V, 60Hz Rotation Speed: 1.3 RPM Dimensions (LxWxH): •...
Need help?
Do you have a question about the Eliminator Decor MBSK and is the answer not in the manual?
Questions and answers