Installation - ADJ ELEMENT ST HEX User Instructions

Element ST Hex
NOTICE: The suitable enviromental temperature for this lighting fixture is between -25˚ C to 45˚ C.
Do not place this lighting fixture in an enviroment where the temperatures are under or above the
temperatures stated above. This will allow the fixture to run at its best and help prolong the fixture
life.
The Element ST Hex is fully operational in three different mounting positions; set on a flat level surface
(ideal set up), hanging upside-down, or mounted sideways on trussing. Be sure this fixture is kept at
least 12m (40ft) away from any flammable materials (decoration etc.). Always use and install a safety
cable as a safety measure to prevent accidental damage and/or injury in the event the clamp fails.
Never use the carrying handle for a secondary attachment.
Clamp Mounting Hole
This unit is primarily designed for uplighting. The unit does come with a threaded mounting hole for
use with clamp installation. Screw one clamp via a M10 screw into the insert located on the rear of
the unit.
ADJ Products, LLC - www.adj.com - Element ST Hex User Manual Page 10
Attach a clamp to the unit by screwing
the clamp in clockwise.

Installation