Table of Contents
Advertisement
12. Platform locking lever (machines with cab)
Always keep to the warnings when tilting or closing the cab
q
floor. Any operation carried out incorrectly may cause seri-
ous injury. Do not tilt or close the cab floor on slopes or if
there is a strong wind.
To tilt or close the cab floor, pull the lever to the "free" position (F).
After tilting or closing the cab floor, release the lever, which will
automatically return to the "locked" position (L).
(F): free
(L): locked
For further details on how to tilt the cab floor, see "3.2.9 TILTING
THE CAB FLOOR (machines with canopy)".
WARNING
WEAM012405
INSTRUMENTS AND CONTROLS
9JM06642
97
Advertisement
Table of Contents
