Table of Contents
Advertisement
10. Battery main switch
The battery main switch is located inside the engine compartment
and can be reached by opening the engine bonnet (see "3.2.6
ENGINE HOOD").
Turn the key anticlockwise, to (O) OFF, to interrupt the current
supplied by the battery to the electrical system; for safety rea-
sons, extract the key after turning the switch to OFF.
Position (O) OFF:
q
Power supply interrupted.
The key can be extracted in this position.
Position (I) ON:
q
All electric circuits are powered.
Make sure that the switch is at this position before starting the
engine.
IMPORTANT
The battery main switch must always be set to ON, except
q
in the following cases:
When the machine is not going to be used for a long
q
period or when the machine is prepared for prolonged
inactivity.
When the electric circuits need to be fixed.
q
When arc welding.
q
When the battery is removed.
q
When a fuse is replaced.
q
Before turning the battery main switch to OFF, wait at least
q
one minute after shutting off the engine. Never turn the
switch to OFF while the engine is running as the electric
circuits may be seriously damaged.
When the battery is disconnected, all electric circuits re-
q
main powerless, risking losing all data stored regarding
time adjustment or radio channels selection and other
functions.
11. Revolving light switch (if installed)
It is an ON-OFF switch used to turn on the beacon light (LED on).
WEAM012405
INSTRUMENTS AND CONTROLS
RKAB9200
RKA26340
RKA23550
89
Advertisement
Table of Contents
