Table of Contents
Advertisement
MAINTENANCE PROCEDURES
Stop the machine on a firm and level surface and lower the equip-
ment to the ground.
1.
Raise the undercarriage using boom and arm.
Carry out this operation shifting the control levers very slowly.
2.
Gradually loosen the grease valve (1) to let the grease out;
do not give the valve more than one turn.
3.
If the grease does not come out smoothly, move the machine
slowly forward and backward covering a short distance.
4.
Introduce the steel tubes (2) in the track, turn the sprocket as
if in reverse (3), so that the steel tubes move with the track
and get engaged with the idler roller; make the track (4) slide
sidewards and remove it.
220
WEAM012405
RYA05220
Advertisement
Table of Contents
