Table of Contents
Advertisement
UNLOADING THE MACHINE
NOTE
Load and unload the machine on/from the trailer on firm and level ground only, and widen the track gauge.
q
Keep a safety distance from the edge of the road.
1.
Firmly engage the trailer brakes and place the wedges (1)
under the wheel to prevent it from moving.
Place the ramps at the right and left sides (2) in such a way
q
that they are parallel and there is the same distance from
the centre (3) of the trailer. The installation angle (4) must
be 15° max. If the ramps bend excessively under the
weight of the machine, put blocks under the ramps.
2.
Remove the chains and the metal cables with which the
machine has been secured.
3.
Start the engine and let it warm up completely.
4.
Make sure that the travel speed increase warning light is off.
NOTE
If the warning light is on, press the speed selection switch to the
q
low speed position (B).
5.
Shift the safety lever to the "free" position (F).
WEAM012405
TRANSPORTING THE MACHINE
RKA27170
B
RKA26650
RKA22540
169
Advertisement
Table of Contents
