Table of Contents
Advertisement
2.
When travelling uphill on a slope, position the work equip-
ment as shown in the diagram on the right.
BRAKING WHEN TRAVELLING DOWNHILL
To brake when travelling downhill, shift the travel levers to the neutral position. This will automatically engage the
brakes.
WHEN THE ENGINE STOPS ON A SLOPE
If the engine stops when the machine is travelling uphill, shift the travel levers to the neutral position, lower the
bucket to the ground, stop the machine, then start the engine again.
PRECAUTIONS TO BE TAKEN ON SLOPES
If the engine stops when the machine is on a slope, do not use the left work equipment control lever to swing the
turret. The turret will swing due to its own weight.
USE OF THE MACHINE AND RELATED CONTROLS
20-30 cm
WEAM012405
15˚max.
RKA17480
151
Advertisement
Table of Contents
