# configure terminal
(config)# interface vlan 1
(config-if-vlan)# ip address dhcp fallback 192.168.4.171 255.255.255.0
Remark:
1. With factory default, vlan 1 is the only one that includes all switched ports as port members.
2. vlan 1 uses dhcp for IP configuration.
3. Address
192.168.4.171 255.255.255.0
is the fallback IP address when dhcp server is not available.
3.3 Configuring Local Authentication via console and telnet CLI
Example:
(config)# username michael privilege 15 password unencrypted 12345
Remark:
1. The username example is Michael and the password is unencrypted 12345.
2. Michael is given privilege 15, the highest level.
3. The username and password is used as local authentication for CLI and web UI.
admin
Since default username
can not be deleted and not protected with password, it is necessary to configure
admin
a password for
for security purpose.
Configure password for default username admin:
(config)# username admin password unencrypted 12345
Password
unencrypted 12345
is an example.
-33-