Configuring Local Authentication Via Console And Telnet Cli - KTI Networks KGS-2461-S Installation Manual

# configure terminal
(config)# interface vlan 1
(config-if-vlan)# ip address dhcp fallback
Remark:
1. With factory default, vlan 1 is the only one that includes all sw
2 . vlan 1 uses dhcp for IP configuration.
3. Address 192.168.4.171 255.255.255.0

3.3 Configuring Local Authentication via console and telnet CLI

Example:
( config)# username michael privilege 15 password unencrypted 12345
Remark:
1. The username e xample is Michael and the password is unencrypted 12345.
2. Michael is given privilege 15, the highest level.
3 . The username and password is used as local authentication for CLI and web UI.
Since default username
admin
a password for
Configure password for default username admin:
(config)# username admin password unencrypted 12
Password unencrypted 12345
is the fallback IP address when dhcp server is not available.
admin
can not be deleted and not protected with password, it is necessary to configure
for security purpose.
is an exa mple.
192.168.4.171 255.255.255.0
itched ports as port members.
345
-26-