Table of Contents
Advertisement
User Configuration
Select [Configuration] -> [Security] -> [Switch] -> [Users] to configure a new user, Michael as an example.
Configuration
User Name
Privilege Level
Add New User
Description
The name identifying the user. This is also a link to Add/Edit User interface.
The privilege level of the user. The allowed range is 1 to 15. If the privilege level
value is 15, it can access all groups, i.e. that is granted the fully control of the device.
But others value need to refer to each group privilege level. User's privilege should
be same or greater than the group privilege level to have the access of that group. By
default setting, most groups privilege level 5 has the read-only access and privilege
level 10 has the read-write access. And the system maintenance (software upload,
factory defaults and etc.) need user privilege level 15. Generally, the privilege level
15 can be used for an administrator account, privilege level 10 for a standard user
account and privilege level 5 for a guest account.
Click to add a new user.
-36-
Advertisement
Table of Contents
