KTI Networks KGS-2422-TG Series Installation Manual page 37

Add New User
Configuration
User Name
Password
Password (again)
Privilege Level
Save
Reset
Cancel
Click Save
Description
A string identifying the user name that this entry should belong to. The allowed string
length is 1 to 31. The valid user name allows letters, numbers and underscores.
The password of the user. The allowed string length is 0 to 31. Any printable
characters including space are accepted.
Re-enter the password again.
The privilege level of the user. The allowed range is 1 to 15. If the privilege level
value is 15, it can access all groups, i.e. that is granted the fully control of the device.
But others value need to refer to each group privilege level. User's privilege should
be same or greater than the group privilege level to have the access of that group. By
default setting, most groups privilege level 5 has the read-only access and privilege
level 10 has the read-write access. And the system maintenance (software upload,
factory defaults and etc.) need user privilege level 15. Generally, the privilege level
15 can be used for an administrator account, privilege level 10 for a standard user
account and privilege level 5 for a guest account.
Click to save the changes.
Click to undo any changes made locally and revert to previously saved values.
Click to undo any changes made locally and return to the Users.
-37-