KTI Networks KGS-2422-TG Series Installation Manual page 15

10G SFP+ Slots
Compliance
Connectors
Configuration options
Auto-negotiation
Network cables
Eye safety
Console Port
Interface
Connector
Switch Functions
MAC Addresses Table
Forwarding & filtering
Switching technology
Maximum packet length 10240 bytes (Jumbo frame support)
Packet Buffer
Flow control
VLAN function
VLAN support
Aggregation
QoS function
Port Mirroring
AC Power Input (AC powered models)
Interfaces
Operating Input Voltages 100 ~ 240VAC / 0.85-0.3A
Power Consumption
IEEE 802.3 10GBASE SFP+
Dual-speed SFP+ slot supports optional both 1000BASE SFP and 10GBASE SFP+
type fiber transceivers, Direct Attach Cable (DAC) and Active Optical Cable (AOC)
Auto-negotiation 1000Mbps Full duplex, Auto-negotiation 10Gbps Full duplex
(Software configurable)
Flow control pause setting, Remote fault signaling
MMF 50/125m 62.5/125m, SMF 9/125m
IEC 825 compliant
RS-232, DTE type
9-pin D-sub
32K entries
Non-blocking, full wire speed
Store and forward
16Mbit
IEEE 802.3x pause frame base for full duplex operation
Back pressure for half duplex operation
Port-based VLAN and IEEE 802.1Q Tag-based VLAN
4096 VLANs (IEEE 802.1Q)
LACP Port link aggregation (port trunking)
Ethernet type, IP-based, DSCP, TOS-based, VID-based, VLAN Tag-based packet
classification
Port rate control, storm control
Mirror received frames to a sniffer port
IEC320 receptacle
48W max.
-15-