External Monitor - Toshiba TECRA M2 User Manual

Optional Devices
2. Insert the HDD and push forward to ensure a firm connection.
Inserting the HDD
3. Close the lid and slide the lock to the lock position.
Closing the lid
For details on inserting the Slim Select Bay HDD adaptor in the Slim Select
Bay, refer to Chapter 4, Operating Basics.

External monitor

An external analog monitor can be connected to the external monitor port
on the computer. The computer supports VGA and Super VGA video modes.
To connect a monitor, follow the steps below.
1. Turn the computer off.
2. Connect the monitor to the external monitor port.
3. Turn the monitor's power on.
4. Turn the computer on.
When you turn on the power, the computer automatically recognizes the
monitor and determines whether it is color or monochrome.
To change the display settings, press Fn + F5. If you disconnect the monitor
before you turn the computer off, be sure to press Fn + F5 to switch to the
internal display. Refer to Chapter 5, The Keyboard, for details on using hot
keys to change the display setting.
TECRA M2 8-17