Toshiba TECRA M2 User Manual page 70

b. Pressing the eject button will not open the drawer when the
2. Pinch the drawer gently and pull until it is fully opened.
3. Lay the CD/DVD, label side up, in the drawer.
TECRA M2
DVD-ROM drive's power is off. If the power is off, you can open the
drawer by inserting a slender object (about 15 mm) such as a
straightened paper clip into the eject hole just to the right of the eject
button.
Manual release with the eject hole
Pulling the drawer open
Inserting a CD/DVD
Operating Basics
4-7