Backside - Toshiba TECRA M2 User Manual

Backside

The figure below shows the computer's back panel.
V
Video-out jack
Modem jack
■
In case of a lightning storm, unplug the modem cable from the telephone
jack.
■
Do not connect the modem to a digital telephone line. A digital line will
damage the modem.
DC IN 15V
DC IN 15V
LAN jack
Ether
Link indicator (green) This indicator glows green when the computer is
LAN active indicator
(orange)
TECRA M2
-
IDEO OUT JACK
M
ODEM JACK
LAN
ACTIVE
INDICATOR
The backside of the computer
L
INK INDICATOR
( )
ORANGE
( )
GREEN
Plug an S-Video cable into this jack for video-out.
The S-Video cable carries video signal.
In areas where an internal modem is installed as
standard equipment, there is a modem jack that
lets you use a modular cable to connect the
modem directly to a telephone line.
The AC adaptor connects to this socket. Use only
the model of AC adaptor that comes with the
computer. Using the wrong adaptor can damage
your computer.
This jack lets you connect to a LAN. The adaptor
has built-in support for Ethernet LAN (10
megabits per second, 10BASE-T), Fast Ethernet
LAN (100 megabits per second, 100BASE-Tx)
and Gigabit Ethernet LAN (1000 megabits per
second, 1000BASE-T). The LAN has two
indicators. See Chapter 4, Operating Basics, for
details.
connected to a LAN and the LAN is functioning
properly.
This indicator glows orange when data is being
exchanged between the computer and the LAN.
The Grand Tour
DC IN 15V
LAN
JACK
2-5