Chapter 7: Hw Setup; Accessing Hw Setup - Toshiba TECRA M2 User Manual

TECRA M2
HW Setup
This chapter explains how to use the TOSHIBA HW Setup program to
configure your computer. TOSHIBA HW Setup lets you configure settings
for Display, CPU, Boot Priority, Keyboard, USB, LAN, General, Device
Config and Parallel/Printer.
Some models are not equipped with Parallel/Printer tab and/or CPU tab.

Accessing HW Setup

To run HW Setup, click start, click Control Panel, click Printers and
Other Hardware and select TOSHIBA HW Setup.
HW Setup window
The HW Setup window contains the following tabs: General, Device Config,
Parallel/Printer, Display, CPU, Boot Priority, Keyboard, USB and LAN.
There are also three buttons: OK, Cancel and Apply.
OK
Cancel
Apply
General
This window displays the BIOS version and contains two buttons: Default
and About.
Default
About
User's Manual
Chapter 7
Accepts your changes and closes the HW Setup
window.
Closes the window without accepting your
changes.
Accepts all your changes without closing the
HW Setup window.
Return all HW Setup values to the factory settings.
Display the HW Setup version.
7-1