Drag'n Drop Cd+Dvd - Toshiba TECRA M2 User Manual

■
Writing with software other than Drag'n Drop CD+DVD is not
recommended.
When writing or rewriting
Please observe/consider the following when you write or rewrite to a CD-R/
-RW, DVD-R/-RW/-RAM or DVD+R/+RW disc.
■
Do not perform any of the following actions when writing or rewriting:
■
■
■
■
■
■
■
Do not use standby/hibernation while writing or rewriting.
■
Make sure writing or rewriting is completed before going into
standby/hibernation. Writing is completed if you can open the
CD-RW/DVD-ROM, DVD±R/±RW or DVD Multi drive tray.
■
Set the computer on a level surface and avoid places subject to vibration
such as airplanes, trains, or cars. Do not use an unstable surface such
as a stand.
■
Keep mobile phones and other wireless communication devices away
from the computer.
■
Always copy data from the HDD to the DVD-RAM. Do not use cut-and-
paste. The original data will be lost if there is a write error.

Drag'n Drop CD+DVD

Note the following limitations when you use Drag'n Drop CD+DVD:
■
DVD-Video cannot be created using Drag'n Drop CD+DVD.
■
DVD-Audio cannot be created using Drag'n Drop CD+DVD.
■
You cannot use Drag'n Drop CD+DVD's music CD function to record
music to the DVD-R/-RW or DVD+R/+RW disc.
■
Do not use the DISC Backup function of Drag'n Drop CD+DVD to copy
DVD-Video and DVD-ROM with copyright protection.
■
DVD-RAM disc cannot be backed up with the DISC Backup function of
Drag'n Drop CD+DVD.
■
You cannot backup a CD-ROM or CD-R/RW to DVD-R/-RW or
DVD+R/+RW using the DISC Backup function of Drag'n Drop CD+DVD.
■
You cannot back up DVD-ROM, DVD-Video or DVD-R/-RW or
DVD+R/+RW to CD-R/RW using the DISC Backup function of Drag'n
Drop CD+DVD.
TECRA M2
Change users in the Windows XP operating system.
Operate the computer for any other function, including using a
mouse or Touch Pad or closing/opening the LCD panel.
Start a communication application such as a modem.
Apply impact or vibration to the computer.
Install, remove or connect external devices, including the following:
PC card, SD card, USB devices, external display, i.LINK devices,
optical digital devices.
Open the CD-RW/DVD-ROM, DVD±R/±RW or DVD Multi drive.
Operating Basics
4-15